Multi Channel Systems

Roboocyte Accessoires

Products
	BMH Blank measuring head, for building custom TEVC probes, with four tinned connectors for an easy plugging of the silver wire into the socket.
	MH Measuring heads, unit of 4 Ready-to-Use TEVC probes including AgCl-wires
	NH1.0 1 needle holder for injection needles with OD 1.0 mm, 2 replacement gaskets 1.0 mm, 2 O-rings
	NH1.5 1 needle holder for injection needles with OD 1.5 mm, 2 replacement gaskets 1.5 mm, 2 O-rings
	14GC100TF-10 Unit of 20 borosilicate ID 0.78 mm, OD 1 mm, length approx. 7 mm, tip opening approx. 5.5 µm
	18GC100TF-10 Unit of 20 borosilicate ID 0.78 mm, OD 1 mm, length approx. 7 mm, tip opening approx. 7.2 µm
	20GC100TF-10 Unit of 20 borosilicate ID 0.78 mm, OD 1 mm, length approx. 7 mm, tip opening approx. 8 µm
	38GC100TF-10 Unit of 20 borosilicate ID 0.78 mm, OD 1 mm, length approx. 7 mm, tip opening approx. 15.2 µm
	ADG Alignment device for Greiner 96-well plates
	ADN Alignment device for Nunc 96-well plates
	MF4-Set-R Manifold 4 to 1 tubing set optimized for the Roboocyte reservoir stand, including 4-channel manifold, ready-to-use pre-assembled silicone tubing set (ID 0.8, OD1.6 mm) with 4 female luer lock connectors
	MF4-Set-U Manifold 4 to 1 tubing set for universal connections, including 4-channel manifold, ready-to-use pre-assembled silicone tubing set 4 x 1 m (ID 0.8, OD1.6 mm) with 4 straight through connectors
	MF4-Kit Manifold 4 to 1 kit for assembling custom tubing sets, including 4-channel manifold, separate silicone tubing 25 m (ID 0.8, OD1.6 mm), 4 straight through connectors, and 4 female luer lock connectors
	MF8-Set-R Manifold 8 to 1 tubing set optimized for the Roboocyte reservoir stand, including 8-channel manifold, ready-to-use pre-assembled silicone tubing set (ID 0.8, OD1.6 mm) with 8 female luer lock connectors
	MF8-Set-U Manifold 8 to 1 tubing set for universal connections, including 8-channel manifold, ready-to-use pre-assembled silicone tubing set 8 x 1 m (ID 0.8, OD1.6 mm) with 8 straight through connectors
	MF8-Kit Manifold 8 to 1 kit for assembling custom tubing sets, including 8-channel manifold, separate silicone tubing 25 m (ID 0.8, OD1.6 mm), 8 straight through connectors, and 8 female luer lock connectors
	MF16-Set-R Manifold 16 to 1 tubing set optimized for the Roboocyte reservoir stand, including 16-channel manifold, ready-to-use pre-assembled silicone tubing set (ID 0.8, OD1.6 mm) with 16 female luer lock connectors
	MF16-Set-U Manifold 16 to 1 tubing set for universal connections, including 16-channel manifold, ready-to-use pre-assembled silicone tubing set 16 x 1 m (ID 0.8, OD1.6 mm) with 16 straight through connectors
	MF16-Kit Manifold 16 to 1 kit for assembling custom tubing sets, including 16-channel manifold, separate silicone tubing 25 m (ID 0.8, OD1.6 mm), 16 straight through connectors, and 16 female luer lock connectors
	WPG 96-well plate Greiner with cut open well H12, for initial alignment
	WPN 96-well plate Nunc with cut open well H12, for initial alignment
	MTC Model test cell, for amplifier testing
	Gilson-GX-271 GILSON GX-271 liquid handler, including Minipuls 3 peristaltic pump, from Gilson Inc.; for sample application and continuous perfusion via Roboocyte, controlled by Roboocyte program. Complete with reservoir holding racks for 9 ml tubes, 60 mm vials, and 250 ml bottles.
	Jun-Air Compressor This air compressor from Jun-Air supplies oil and water free compressed air. It fulfils all requirements for use with the Roboocyte.
	Tecan-Columbus Columbus Microplate Washer from Tecan, for automated oocyte washing in 96-well plates, with drip mode option and 8 channel manifold. Not a must, but nice to have.