ME-System Accessories

Products
	SD16 16-Channel Signal divider: Can be placed between a filter amplifier (FA or PGA) and MC_Card, permits to select any channel, does not interfere with the data acquisition, for example for connecting an oscilloscope or other devices to single channels.
	SD32 32-Channel Signal divider: Can be placed between a filter amplifier (FA or PGA) and MC_Card, permits to select any channel, does not interfere with the data acquisition, for example for connecting an oscilloscope or other devices to single channels.
	SD64 64-Channel Signal divider: Can be placed between a filter amplifier (FA or PGA) and MC_Card, permits to select any channel, does not interfere with the data acquisition, for example for connecting an oscilloscope or other devices to single channels.
	GND64 64-Channel Signal grounding unit: For silencing defective electrodes. Single channels can be switched off with small toggle switches. Inputs not in use are grounded.
	SC2x32 Signal collector for connecting up to 2 x MPA32I: The 2 x 32 input channels are collected and can be connected to the following filter amplifier (FA or PGA) via a 68-pin MCS standard cable. Including a 0.08 Hz high pass filter for removing DC offsets.
	SC8x8 Signal collector for connecting up to 8 x MPA8I: The 8 x 8 input channels are collected and can be connected to the following filter amplifier (FA or PGA) via a 68-pin MCS standard cable. Including a 0.08 Hz high pass filter for removing DC offsets.
	SC8x8BC Signal collector for connecting up to 8 x MPA8I: The 8 x 8 input channels are collected and can be connected to the following filter amplifier (FA or PGA) via a 68-pin MCS standard cable. Including a 0.08 Hz high pass filter for removing DC offsets, and a blanking circuit for stimulus artifact suppression (blanking).
	MP-RM With the Michigan probe rod mount you can use the 16 channel acute probes from NeuroNexus Technologies and our miniature preamplifiers MPA8I or MPA32I - all together mounted on a manipulator from Scientifica Ltd.