MEA-System Accessories

Products
	MEA-SG Signal generator for MEA Systems: The MEA Signal Generator is a very convenient tool for all MEA-System users. It is the ideal substitution for time and cost intensive biological experiments and gives the opportunity to train on the MEA-System, to plan biological experiments, control the operating mode of the amplifier and to troubleshoot malfunctions in the setup.
	SD-MEA Signal divider for MEA Systems: Can be placed between an MEA1060 amplifier and MC_Card, permits to select any channel, does not interfere with the data acquisition, for example for connecting an oscilloscope or other devices to single channels. Sockets arranged in the standard 8x8 MEA grid.
	MEAS2/1 MEA Switch 2 to1 for selecting 60 recording channels from two MEA1060 amplifiers: The selected channels are combined to one Electrode Raw Data stream that is delivered to MC_Card by a 68-pin MCS standard Cable. For use with MEA-60 System and all MEA1060 amplifier types.
	MEAS4/2 MEA Switch 4 to 2 for selecting 120 recording channels from four MEA1060 amplifiers: The selected channels are combined to one Electrode Raw Data stream that is delivered to MC_Card by a 68-pin MCS standard Cable. For use with MEA-120 System and all MEA1060 amplifier types.
	MPM3 Stainless steel holder with M3 thread mounting holes, for fixing tools (for example for perfusion or micromanipulation) next to the MEA. For use with MEA1060-Inv amplifiers.
	MEA-T 1 test model probe with cable (for ground connection).
	ALA MEA-PPORT2 MEA perfusion ports including 2 perfusion port holders, and steel magnetic mounting plate
	ALA MEA-PPORT3 MEA perfusion ports including 2 perfusion port holders, sensor holder, and steel magnetic mounting plate.
	ALA MEA-MMP Coated steel magnetic mounting plate