Home » Products

Products Details

MEA120-Inv-4-BC-System-E-Standard

Complete recording system for micro-electrode arrays on inverted microscopes including 4 amplifiers to record from 120 MEA electrodes and 8 additional channels. With enhanced perfusion equipment and another 2 two channel temperature controller. Featuring a blanking circuit for simultaneous stimulation and recording without stimulus artefacts.

  • Data acquisition computer:
    PC configuration 3, with preinstalled hardware, operating system, and software

  • MC_Rack Program:
    Data acquisition and analysis software, including a 2 years maintenance package (software updates and support)

  • MEA_Select Program:
    MEA1060-BC control software, including a 2 year maintenance package (software updates and support)

  • MC_Card 128:
    128-channel PCI-bus data acquisition card, simultaneous 50 kHz sampling on each channel

  • 2 x 68-Pin-Slot:
    Interface for 64 analog inputs and power distribution (68-pin MCS Standard connector)

  • 3-An-Slot:
    Interface for 3 analog inputs (3 BNC connectors)

  • 3-Di-Slot:
    Interface for input bits 0, 1, 2 of the 16-bit digital (TTL) channel (3 BNC connectors)

  • PS20W:
    Low-noise isolated power supply with 42 W power and ± 7 V output voltage

  • MEAS4/2:
    MEA Switch 4 to 2 for selecting 120 recording channels from two MEA1060 amplifiers

  • MEA_Switch program:
    MEAS4/2 control software, including a 2 year maintenance package (software updates and support)

  • 4 x MEA1060-Inv-BC-Standard amplifier (incl. MEA1060-Inv-BC-PA, FA60SBC and C68x1M):
    Probe interface and integrated 60 channel pre- and filter amplifier for 60 electrode MEAs, for inverted microscopes, with blanking circuit, controlled by MEA_Select software.
    Gain and bandwidth as specified in the order.
    (Standard amplifier specifications:
    Gain: 1100, bandwidth: 1 Hz - 3 kHz;
    possible amplifier specifications:
    Gain: 500-5000, bandwidth: 1 Hz - 10kHz)

  • 2 x C68x2M:
    68-pin MCS standard cable, 2 m

  • 4 x TC02:
    2-channel     temperature controller for biological samples, set-point temperature reached fast within 30 s to 5 minutes, control temperature range from ambient temperature to +50 °C,
    precision controller using PID characteristics

  • 4 x PH01:
    Perfusion cannula with programmable fluid temperature, controlled by TC01/2

  • 5 MEAs:
    Type and electrode grid as specified in the order (complete catalog range available)

  • Accessories:
    Cable assembly, reference electrodes, test model probe, spare parts, user manuals


Technical specifications as specified in the data sheet unless noted otherwise in the order.

<- Back to the list