sales [at] multichannelsystems [dot] com
phone +49 7121 9092525

MEA-System Accessories

Peristaltic perfusion system PPS2 with one inlet and one outlet pump. Both pumps can be operated independently or inflow and outflow can be linked (percentaged difference adjustable). Designed for electrophysiological applications, for example for use with MEA-Systems.

Video microscope table with one video microscope underneath. Images the electrode field of a microelectrode array (MEA) in an amplifier placed on top of the table and transfers the image via USB 2.0 to a computer. Suitable for all MEA1060 amplifiers, USB-MEA32-STIM4-System, USB-MEA256-System, MEA2100-HS60, and MEA2100-HS120.

Digital in/out extension for connecting other devices to single digital bits of the 16-bit digital input/output channel of the MC_Card or USB-data acquisition via BNC connectors (up to 16 inputs and 16 outputs). For example for synchronizing stimulation and recording or for applying feedback.

Low-noise isolated power supply with 42 W power and ±7 V output voltage. For supplying power to MCS amplifiers or custom applications.

Constant vacuum pump CVP with pressure control. Vacuum pump with a precision differential pressure sensor to measure the target pressure in relation to the actual ambient pressure. For use, for example, with MEA1060-Systems, equipped with a perfusion ground plate and pMEAs.

Heatable perfusion cannula with temperature sensor; temperature can be programmed with the temperature controller TC01 or TC02.

Magnetic perfusion holder for perfusion cannula.

60 channel impedance testing device for microelectrode arrays to identify the quality of MEAs and monitor the development of the impedance of each electrode over the entire life span of the array. Compatible with MEAs with 60 electrodes.

Signal divider for MEA Systems: Can be placed between an MEA1060 amplifier and MC_Card, permits to select any channel, does not interfere with the data acquisition, for example, for connecting an oscilloscope or other devices to single channels. Sockets arranged in the standard 8x8 MEA grid.

Test model probe with CB-GND cable (for ground connection). For all MEA1060 amplifiers and MEA2100-HS(2x)60.

www.multichannelsystems.com

Innovations in Electrophysiology

MEA-System Accessories

PPS2

MEA-VMT-1

Di/o

PS40W

CVP

PH01

MPH

MEA-IT60

SD-MEA

Test-60MEA

Pages

Search form

You are here

MEA-System Accessories

Pages