www.multichannelsystems.com

Innovations in Electrophysiology

Multiwell+MEA2100-60-System

Manufacturer: 
Multi Channel Systems MCS GmbH
Made in Germany

Bundle of Multiwell and MEA2100-60-System.

Multiwell-MEA workstation for recording and analyzing data from multiwell MEA plates. With integrated data acquisition for recording from 288 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and voltage stimulus generator (simultaneous stimulation in all wells possible. Any electrode can be selected for stimulation).
MEA2100 workstation for recording and analyzing data from 60-electrode MEAs (microelectrode array). With integrated data acquisition for recording from 60 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and 3-channel current or voltage stimulus generator.
Complete with MCS-interface board 3.0 multiboot, Multiwell-MEA headstage, MEA2100-60 headstage, data acquisition computer with preinstalled software, and accessories. USB High Speed data transfer with a sampling rate of up to 50 kHz/channel.

  • Data acquisition computer:
    - PC with 2 monitors, keyboard and mouse
    - With preinstalled hardware operating system and software
  • Multiwell Screen and Multi Channel Suite programs:
    - Data acquisition and analysis softwares
    - Including a 2 years maintenance package (software updates and support)
  • Multiwell-MEA headstage:
    - Pre- and filter amplifier with integrated data acquisition and analog-digital converter
    - Gain and bandwidth adjustable via software
    - Data resolution 24 bit
    - Direct access to each electrode for stimulation via internal stimulus generator.
    - Control of stimulator via the included data acquisition software Multiwell Screen
    - Integrated blanking circuit for stimulus artifact suppression
    - Integrated stimulus generators (any electrode can be selected for stimulation)
    - Voltage stimulation at max. +/-10 V
    - Sampling rate max. 50 kHz per channel
    - Integrated heating plate and temperature control
  • MEA2100 headstage (MEA2100-HS60):
    - Pre- and filter amplifier with integrated data acquisition and analog-digital converter
    - Gain and bandwidth adjustable via software Multi Channel Suite
    - Data resolution: 24 bit
    - Direct access to each electrode for stimulation via internal stimulus generator.
    - Control of stimulator via the included data acquisition software
    - Current stimulation at max. +/-1 mA
    - Voltage stimulation at max. +/-10 V
    - 3 independent stimulus generators
    - Sampling rate max. 50 kHz per channel
    - Integrated heating element (Pt 100 sensor)
    - With installed metal plate for fixing perfusion equipment
  • MCS interface board 3.0 multiboot (MCS-IFB 3.0 Multiboot):
    Includes various in-/outputs:
    - 4x Digital Out: Interface for output bit 0 -3 of the 16-bit digital input / output channels (Lemo connector)
    - 4x Digital In for synchronization with other instruments (bit 0 - 3) (Lemo connector)
    - Digital IN / OUT: Interface for 16-bit digital input / output channels. Generates or accepts TTL-pulses
    - 1x Stereo Out: Possibility to export 2 channels (e.g on an oscilloscope or headphones making the signals audible)
    - 2x Analog IN: Interface for 2 additional analog inputs (channel 1 and 2) (Lemo connector)
    - Analog IN: 8-channel Analog input (channel 1-8)
    - 1x Ground
    - 1x Universal Serial Bus High Speed for transferring digitally converted data to any data acquisition computer with a sampling rate of up to 50 kHz (USB High Speed cable)
    - 1x USB Serial Bus High Speed for programing the integrated signal processor
    - External power supply: 100-240 V input voltage range
  • TC01:
    1-channel temperature controller for biological samples
    - Set-point temperature reached fast within 30 seconds to 5 minutes
    - Control temperature range from ambient temperature to +50 °C
    - Precision controller using PI characteristics
    - 100-240 V input voltage range, external power supply
  • TCX_Control Program:
    TCX-Control is a software to control the MCS temperature controllers. Through the quick USB interface, it is possible to adjust all settings of the TC01/02 temperature controller online.
  • Accessories:
    - Signal generator for MEA2100-HS60
    - Spare parts
    - CD with user manuals and software

References