www.multichannelsystems.com

Innovations in Electrophysiology

Multiwell-MEA-System

Manufacturer: 
Multi Channel Systems MCS GmbH
Quality Made in Germany

Multiwell-MEA workstation for recording and analyzing data from multiwell MEA plates. With integrated data acquisition for recording from 288 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and voltage stimulus generator (simultaneous stimulation in all wells possible. Any electrode can be selected for stimulation).
Complete with Multiwell-MEA headstage, interface board, and accessories. USB High Speed data transfer with a sampling rate of up to 50 kHz/channel.

• Multiwell-MEA headstage:
  Pre- and filter amplifier with integrated data acquisition and
    analog-digital converter
  - Bandwidth adjustable via software
  - Data resolution 24 bit
  - Direct access to each electrode for stimulation via internal
    stimulus generator.
  - Control of stimulator via the included data acquisition
    software Multiwell Screen
  - Integrated blanking circuit for stimulus artifact suppression
  - Integrated stimulus generators (any electrode can be selected
    for stimulation)
  - Current stimulation at max. +/-1 mA
  - Voltage stimulation at max. +/-10 V
  - Sampling rate max. 50 kHz per channel
  - Integrated heating plate and temperature control
• Interface board multiboot (IFB-C):
  Interface board with signal processor for real-time signal
  detection and feedback
  Includes various in-/outputs:
  - 16 possible boot images to operate all MCS headstages
of the modular 2100 amplifier suite
  - 16-bit digital input/output channels for TTL integration, 3.3/5 V compatible
(All channels accessible on the backside via Honda-PCS-XE68LFD,
additional bit 0-3 digital in and bit 0-3 digital out accessible on
the front via LEMO EPL.00.250.NTN)
  - Channel definition via software: IFB-Control
(free to download) – Boot image definition
  - 8 analog input channels, +/- 10 V voltage input range
@ 24 bit ADC accessible on the front
(All channels via DIL10Header-100mil, channel 1 and 2
additional via LEMO EPL.00.250.NTN)
  - Audio/stereo out (standard stereo jack 3.5 mm)
  - USB-3.0 type C data transfer to PC (cable included)
  - iX industrial, type B cable for connecting IFB-C to
headstage/signal collector unit/receiver (cable included)
  - DSP-JTAG for direct programming of the built-in DSP
(DIL14Header-100mil-angeled)
  - Physical ground socket (4 mm socket)
  - External power supply included: 24 V/65 W, 110-240 V
• Multiwell Screen program:
  - Data acquisition and analysis software
  - Including a 2 years maintenance package (software updates
    and support)
• Accessories:
  - USB memory stick with user manuals and software

Technical specifications as specified in the data sheet unless noted otherwise in the order.

References