Request a demo MCS Online Shop
Gold spring contact comb for MEA1060-Up amplifier
- o-Ring for use with perfusion ground plates for all MEA1060 amplifiers and MEA2100-HS(2x)60/120
- 40x1mm, set of three
68-pin MCS standard cable, 0.5m.
68-pin MCS standard cable, 1m.
68-pin MCS standard cable, 2m.
68-pin MCS standard cable, 3m.
- Cable from STG to MEA1060-Inv/Up amplifier, 3-pole
- With ground
Cables from STG to MEA1060-Inv/Up-BC amplifier
- 1 cable 1-pole, red
- 2 cables 1-pole, black
- 1 cable 1-pole, blue
Cable from STG to MEA1060-Inv/Up amplifier or USB-MEA256-System (via 256MEA-Stim-C-Con)
Cable with Lemo connectors on both ends.
Cable with one Lemo and one BNC connector, 1m.
- Power supply cable connecting PS20W/PS40W to USB-ME-main device
- Solder lug for MEA1060-Inv and MEA1060-Up-BC amplifier
Stainless steel holder with M3 thread mounting holes, for fixing tools (for example perfusion or micromanipulation) next to the MEA. For use with MEA1060-Inv amplifiers.
Temperature Controller, 1 channel.
Temperature Controller, 2 channels.
Cable for connection of TC01/02 to MEA2100-HS, or to PH01
1 Ag/AgCl-pellet for grounding the bath
1 Ag-wire for grounding the bath
Cable connecting the internal reference electrode of a test model probe or signal generator for a MEA to ground
60 channel impedance testing device for microelectrode arrays to identify the quality of MEAs and monitor the development of the impedance of each electrode over the entire life span of the array. Compatible with MEAs with 60 electrodes.
Test model probe with CB-GND cable (for ground connection). For all MEA1060 amplifiers and MEA2100-HS(2x)60.
Constant Vacuum Pump with pressure control.
Heatable perfusion cannula with temperature sensor; temperature can be programmed with the temperature controller TC01 or TC02.