Schedule a meeting Request a demo MCS Online Shop
Signal generator for MEA Systems: Can be placed in MEA1060 amplifier. Simulates 12 different types of sine curves and biological signals.
Digital in/out extention.
- Gold spring contacts for MEA1060-Inv/MEA1060-Inv-BC amplifier
- 10 pieces
- o-Ring for use with perfusion ground plates for all MEA1060 amplifiers and MEA2100-HS(2x)60/120
- 40x1mm, set of three
68-pin MCS standard cable, 0.5m.
68-pin MCS standard cable, 1m.
68-pin MCS standard cable, 3m.
Cable with Lemo connectors on both ends.
Cable with one Lemo and one BNC connector, 1m.
Temperature Controller, 2 channels.
Cable for connection of TC01/02 to MEA2100-HS, or to PH01
1 Ag/AgCl-pellet for grounding the bath
Cable connecting the internal reference electrode of a test model probe or signal generator for a MEA to ground
60 channel impedance testing device for microelectrode arrays to identify the quality of MEAs and monitor the development of the impedance of each electrode over the entire life span of the array. Compatible with MEAs with 60 electrodes.
Test model probe with CB-GND cable (for ground connection). For all MEA1060 amplifiers and MEA2100-HS(2x)60.
Constant Vacuum Pump with pressure control.
Heatable perfusion cannula with temperature sensor; temperature can be programmed with the temperature controller TC01 or TC02.
Magnetic perfusion holder for perfusion cannula.
Peristaltic perfusion system PPS2 with 2 independent pumps.
Video microscope table with one video microscope underneath. Images the electrode field of a microelectrode array (MEA) in an amplifier placed on top of the table and transfers the image via USB 3.0 to a computer. Suitable for all MEA1060 amplifiers, USB-MEA32-STIM4-System, USB-MEA256-System, MEA2100-HS32, MEA2100-HS60, and MEA2100-HS120.