Request a demo MCS Online Shop
Interface board 3.0 multiboot with signal processor for real-time signal detection and feedback. Receives data from MEA2100-Headstages, Multiwell-MEA-Headstage, CMOS-MEA5000-Headstage, ME2100-Systems or W2100-Systems.
Headstage to record data from one 60-electrode MEA with small footprint and operatable in a humid incubator.
Peristaltic perfusion system PPS2 with 2 independent pumps.
Heatable perfusion cannula with temperature sensor; temperature can be programmed with the temperature controller TC01 or TC02.
Constant Vacuum Pump with pressure control.
Magnetic perfusion holder for perfusion cannula.
Temperature Controller, 1 channel.
Temperature Controller, 2 channels.
Video microscope table with one video microscope underneath. Images the electrode field of a microelectrode array (MEA) in an amplifier placed on top of the table and transfers the image via USB 3.0 to a computer. Suitable for all MEA1060 amplifiers, USB-MEA32-STIM4-System, USB-MEA256-System, MEA2100-HS32, MEA2100-HS60, and MEA2100-HS120.
Optical stimulator for MEA2100-HS60/120/256
60 channel impedance testing device for microelectrode arrays to identify the quality of MEAs and monitor the development of the impedance of each electrode over the entire life span of the array. Compatible with MEAs with 60 electrodes.
Signal generator for MEA2100-Systems: Can be placed in MEA2100-HS(2x)60. Simulates 12 different types of sine curves and biological signals.
Test model probe with CB-GND cable (for ground connection). For all MEA1060 amplifiers and MEA2100-HS(2x)60.
Climate chamber for MEA2100-Systems. Covers the MEA to create a 5 % CO2 atmosphere (humid or non-humid) around the biological probe. Connects magnetically to the MEA2100-headstage.
Gold spring contacts for MEA2100-headstages, 10 pieces.
Cable for connection of TC01/02 to MEA2100-HS, or to PH01
1 Ag/AgCl-pellet for grounding the bath
1 Ag-wire for grounding the bath
Cable connecting the internal reference electrode of a test model probe or signal generator for a MEA to ground
Cable with one Lemo and one BNC connector, 1m.