You are here
Multiwell+CMOS-MEA5000-System

Bundle of Multiwell and CMOS-MEA5000-System.
Multiwell-MEA workstation for recording and analyzing data from multiwell MEA plates. With integrated data acquisition for recording from 288 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and voltage stimulus generator (simultaneous stimulation in all wells possible. Any electrode can be selected for stimulation).
CMOS-MEA workstation for recording and analyzing data from active CMOS-MEAs. With integrated data acquisition for recording from 4225 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and 3-channel voltage stimulus generator for stimulating 1024 stimulation sites on the CMOS chip.
Complete with interface board, Multiwell-MEA headstage, CMOS-MEA-headstage, data acquisition computer with preinstalled software, perfusion kit, and accessories.
USB High Speed data transfer with a sampling rate of up to 50 kHz/channel.
• Multiwell-MEA headstage:
- Pre- and filter amplifier with integrated data acquisition and
analog-digital converter
- Bandwidth adjustable via software
- Data resolution 24 bit
- Direct access to each electrode for stimulation via internal
stimulus generator.
- Control of stimulator via the included data acquisition
software Multiwell Screen
- Integrated blanking circuit for stimulus artifact suppression
- Integrated stimulus generators (any electrode can be selected
for stimulation)
- Current stimulation at max. +/-1 mA
- Voltage stimulation at max. +/-10 V
- Sampling rate max. 50 kHz per channel
- Integrated heating plate and temperature control
• CMOS-MEA5000 headstage:
Pre- and filter amplifier with integrated data acquisition,
stimulus generator, and analog-digital converter
- Bandwidth adjustable via software
- Data resolution: 14 bit
- Direct access to each stimulation site for stimulation
via internal stimulus generator.
- Control of stimulator via the included data acquisition
software CMOS-MEA-Control
- Integrated blanking circuit for stimulus artifact suppression
- 3 independent stimulus generators
- Voltage stimulation at max. +/-2 V
- Sampling rate max. 25 kHz per channel
• Interface board multiboot (IFB-C):
Interface board with signal processor for real-time signal
detection and feedback
Includes various in-/outputs:
- 16 possible boot images to operate all MCS headstages
of the modular 2100 amplifier suite
- 16-bit digital input/output channels for TTL integration, 3.3/5 V compatible
(All channels accessible on the backside via Honda-PCS-XE68LFD,
additional bit 0-3 digital in and bit 0-3 digital out accessible on
the front via LEMO EPL.00.250.NTN)
- Channel definition via software: IFB-Control
(free to download) – Boot image definition
- 8 analog input channels, +/- 10 V voltage input range
@ 24 bit ADC accessible on the front
(All channels via DIL10Header-100mil, channel 1 and 2
additional via LEMO EPL.00.250.NTN)
- Audio/stereo out (standard stereo jack 3.5 mm)
- USB-3.0 type C data transfer to PC (cable included)
- iX industrial, type B cable for connecting IFB-C to
headstage/signal collector unit/receiver (cable included)
- DSP-JTAG for direct programming of the built-in DSP
(DIL14Header-100mil-angeled)
- Physical ground socket (4 mm socket)
- External power supply included: 24 V/65 W, 110-240 V
• Multiwell Screen and CMOS-MEA-Control programs:
- Data acquisition and analysis softwares
- Including a 2 years maintenance package (software updates
and support)
• Data acquisition computer:
- PC with 2 monitors, keyboard and mouse
- With preinstalled hardware operating system and software
Perfusion kit:
• TC02:
2-channel temperature controller for biological samples
- Set-point temperature reached fast within 30 seconds to 5 minutes
- Control temperature range from ambient temperature to +50 °C
- Precision controller using PI characteristics
- 100-240 V input voltage range, external power supply
• TCX_Control Program:
TCX-Control is a software to control the MCS temperature controllers. Through
the quick USB interface, it is possible to adjust all settings of the TC01/02
temperature controller online.
• 1 x PH01:
- Heatable perfusion cannula with temperature sensor
- Controlled by TC01/02
• 1 x PPS2:
- Peristaltic perfusion system with one inlet and one drain pump
- Controlled by software or touch pad
- Flow rate: 0 - 30 ml/min
• Perfusion Accessories:
- 2 magnetic perfusion holders
- Replacement set of fluidic devices (PPS2-Set-F)
• Accessories:
- Signal generator
- Spare parts
- CMOS dark chamber
- CMOS tissue holder
- USB memory stick with user manuals and software
Technical specifications as specified in the data sheet unless noted otherwise in the order.