Innovations in Electrophysiology


Multi Channel Systems MCS GmbH
Quality Made in Germany

MEA workstation with small footprint for recording and analyzing data from 60-electrode MEAs (microelectrode array). With integrated data acquisition for recording from 60 MEA electrodes and 8 additional analog channels. Integrated filter amplifier and 2-channel current or voltage stimulus generator. Headstage can be operated in a humid incubator. Complete with MEA2100-Mini-headstage, signal collector unit (SCU), MCS-interface board 3.0 multiboot, data acquisition and analysis software, power supply, and accessories. USB High Speed data transfer with a sampling rate of up to 50 kHz/channel.

  • Data acquisition and analysis software Multi Channel Suite
    - Including a 2 years maintenance package (software updates and support)
  • MEA2100-Mini headstage (MEA2100-Mini-HS60):
    Pre- and filter amplifier with integrated data acquisition and analog-digital converter. Can be operated in a humid incubator.
    - Dimensions: 186 mm x 80 mm x 12 mm
    - Gain and bandwidth adjustable via software
    - Data resolution: 24 bit
    - Direct access to each electrode for stimulation via internal stimulus generator
    - Control of stimulator via the included data acquisition software
    - Integrated blanking circuit for stimulus artifact suppression
    - 2 independent stimulus generators
    - Current stimulation at max. +/-1 mA
    - Voltage stimulation at max. +/-10 V
    - Sampling rate max. 50 kHz per channel
    - Integrated heating element (PT 100 sensor)
  • MCS signal collector unit (MCS-SCU):
    - Output for analog data to interface with 3rd party data acquisitions
    - Four programmable outputs for optical stimulation (optogenetics)
    - Up to four MEA2100-Mini headstages can be operated with one MCS-SCU
    - Up to two signal collector units can be connected to one MCS-IFB
  • MCS interface board 3.0 multiboot (MCS-IFB 3.0 Multiboot):
    Interface board with signal processor for real-time signal detection and feedback
    Includes various in-/outputs:
    - 4x Digital Out: Interface for output bit 0 -3 of the 16-bit digital input / output channels (Lemo connector)
    - 4x Digital In for synchronization with other instruments (bit 0 - 3) (Lemo connector)
    - Digital IN / OUT: Interface for 16-bit digital input / output channels. Generates or accepts TTL-pulses
    - 1x Stereo Out: Possibility to export 2 channels (e.g on an oscilloscope or headphones making the signals audible)
    - 2x Analog IN: Interface for 2 additional analog inputs (channel 1 and 2) (Lemo connector)
    - Analog IN: 8-channel Analog input (channel 1-8)
    - 1x Ground
    - 1x Universal Serial Bus High Speed for transferring digitally converted data to any data acquisition computer with a sampling rate of up to 50 kHz (USB High Speed cable)
    - 1x USB Serial Bus High Speed for programing the integrated signal processor
    - External power supply: 100-240 V input voltage range
  • Accessories:
    - Signal generator
    - Spare parts
    - CD with user manuals and software

Technical specifications as specified in the data sheet unless noted otherwise in the order.