Schedule a meeting Request a demo MCS Online Shop
Heating element with Pt100 sensor, spare part for MEA2100-HS(2x)60/-HS120.
Revision A for MEA2100-HS60 or -HS120 with serial number 1-142 or MEA2100-Lite-HS with serial number 90001-90025 and all versions of the MEA2100-HS2x60.
Digital in/out extention.
o-Ring-PGP: - o-Ring for use with perfusion ground plates for all MEA1060 amplifiers and MEA2100-HS(2x)60/120 - Silicone - 40x1mm, set of three
Data transfer cable for MEA2100-Systems
68-pin MCS standard cable, 0.5m.
68-pin MCS standard cable, 1m.
68-pin MCS standard cable, 3m.
Cable with Lemo connectors on both ends.
Cable with one Lemo and one BNC connector, 1m.
Heating element with Pt100 sensor, spare part for MEA2100-HS60/-HS120.
Revision B for MEA2100-HS60 or -HS120 with serial number 143or higher or MEA2100-Lite-HS with serial number 90026 or higher.
Revision B for MEA2100-HS60 or -HS120 with serial number 143 or higher or MEA2100-Lite-HS with serial number 90026 or higher.
Temperature Controller, 2 channels.
Cable for connection of TC01/02 to MEA2100-HS, or to PH01
1 Ag/AgCl-pellet for grounding the bath
Cable connecting the internal reference electrode of a test model probe or signal generator for a MEA to ground
Gold spring contacts for MEA2100-headstages, 10 pieces. Suitable for MEA2100-HS60/HS2x60/HS120.
60 channel impedance testing device for microelectrode arrays to identify the quality of MEAs and monitor the development of the impedance of each electrode over the entire life span of the array. Compatible with MEAs with 60 electrodes.
Test model probe with CB-GND cable (for ground connection). For all MEA1060 amplifiers and MEA2100-HS(2x)60.
Constant Vacuum Pump with pressure control.
Heatable perfusion cannula with temperature sensor; temperature can be programmed with the temperature controller TC01 or TC02.
Magnetic perfusion holder for perfusion cannula.
Peristaltic perfusion system PPS2 with 2 independent pumps.
Climate chamber for MEA2100-Systems. Covers the MEA to create a 5 % CO2 atmosphere (humid or non-humid) around the biological probe. Connects magnetically to the MEA2100-headstage.
Signal generator for MEA2100-Systems: Can be placed in MEA2100-HS(2x)60. Simulates 12 different types of sine curves and biological signals.
